Pool & Spa · Nashville, TN
Pool & Spa in Columbia, TN
Columbia pool contractors for inground pool construction, renovation & resurfacing, weekly pool service and more. Pools engineered for clay, equipment sized for the water, service on a schedule that holds, across Maury County and the rest of Middle Tennessee.
Estimate request
Tell us about the job.
Straight to us, and a reply the same day.
What Columbia’s houses mean for pool and spa
Older pools are plaster over gunite from the seventies and eighties, and the work is resurfacing, replumbing the equipment pad and replacing the decking; a renovation, not a rebuild.
The house and its yard — the walkout, the deck, the utility runs — set where the pool and the equipment can go, and the design starts there.
Newer houses have the yard and the electrical capacity for a pool, and the design starts with the HOA and the setbacks before the shape.
Building in clay means the shell is engineered for the soil’s movement, the excavation is priced for it, and the drainage keeps water from lifting an empty pool; all three are in the plan.
Columbia at a glance
What we work on here.
Housing stock
Significant pre-1940 stock plus recent growth
County
Maury County
Ground conditions
Rolling clay; shallow or stone foundations under the old houses
Permits issued by
City of Columbia Building and Codes
In and around Columbia:
- Downtown Columbia
- Northfield
- Graymere
- Riverside
- Hampshire area
Services
Pool & Spa services in Columbia.
Inground Pool Construction
Gunite and fiberglass pools engineered for the site, with the excavation, plumbing, deck and equipment as one contract.
Learn moreRenovation & Resurfacing
Replaster, pebble and tile finishes, new coping and decking on a pool whose shell is still sound.
Learn moreWeekly Pool Service
Chemistry, brushing, baskets and filters on a fixed schedule, with readings recorded rather than guessed.
Learn moreEquipment Repair
Pumps, filters, heaters, salt systems and automation diagnosed rather than replaced by default.
Learn moreLeak Detection
Pressure testing and dye work to find where the water is actually going before anything is dug up.
Learn moreHot Tubs & Spas
Spa installation, electrical coordination, service and the pad or deck framing underneath.
Learn moreWhy homeowners here call
What brings us to Columbia.
Excavating in Middle Tennessee means meeting limestone. Across much of Davidson, Williamson and Rutherford County the bedrock is close enough to the surface that a pool dig hits rock, and that turns a day of excavation into hammering or blasting. It is the most common reason a pool costs more than the original number, which is why an honest contract names what happens if rock is found rather than leaving it open.
- Coping or decking cracked, lifting or a trip hazard
- A hot tub that will not hold temperature
- Water level dropping faster than evaporation explains
- Plaster rough underfoot, stained or showing the shell beneath
Skimping on decking drainage. Water running off the deck toward the house is a foundation problem created by a pool project.
Nearby
Also serving these towns.
The Deep End
Pool & Spa advice for Columbia homeowners.
September 28, 2026
Leaf Drop, Tannin Stains and the Fall Pool
Oak and maple leaves sitting on a pool floor leave their outlines behind in brown. The stain usually comes out; the damage to the pump from a clogged basket is harder.
Read itSeptember 21, 2026
Single-Speed or Variable-Speed Pool Pump
A single-speed pump runs flat out whether the pool needs it or not. A variable-speed pump runs slow most of the day, and the physics of that is why the bill drops.
Read itSeptember 7, 2026
Why a Pool Loses Water and How to Find It
Every pool loses water in a Tennessee summer. The question is whether it is losing more than the weather explains, and there is a simple test.
Read itFAQ
Pool & Spa in Columbia — questions
Do you cover Columbia, TN?
Yes. Our pool builders and service technicians cover Columbia and all of Maury County, with Spring Hill, Franklin, Brentwood, Nashville inside the same range.
How much does pool and spa cost in Columbia?
A Columbia pool is priced by the shell — gunite, vinyl or fiberglass — the size, the equipment and the decking, with the excavation and the site conditions as the line that moves most; weekly service is priced by the visit, and a repair by the part and the hour. The house and its yard — the walkout, the deck, the utility runs — set where the pool and the equipment can go, and the design starts there.
Who issues permits for pool and spa in Columbia?
City of Columbia Building and Codes permits a pool as a structure with a barrier and inspects the electrical bonding; a pool built without one is a pool that cannot be insured or sold with the house.
How quickly can you get to Columbia?
A pool design visit in Columbia is usually within a couple of weeks; the build runs weeks to months by the shell type; service starts the following week and a broken pump is seen within a day or two.
What areas around Columbia do you serve?
Pool contractors and service technicians serving Columbia also cover Spring Hill, Franklin, Brentwood, Nashville; the range is 65 towns in 12 counties.
Free estimate
Need a pool contractor in Columbia?
Tell Nashville's Pool & Spa what is going on and we will come back with a free written estimate for the job in Columbia.